Front panel edge
The joint between a plastic or wood-effect panel and the bath rim or the floor.
Bath panel and overflow sealing
Bath panel sealing renews the silicone where the panel or plinth meets the bath and the floor, and checks the overflow if that void is wet. Book it when water is inside the panel, not running over the rim. The wall rim is a separate bath reseal. Send a photo on the quote form, or WhatsApp the same details.
Who it is for
Who books panel sealing
Homes who lift the panel and find a wet floor. People with a dripping overflow hose. Anyone whose bath rim looks fine but the ceiling below still marks after a deep bath. A panel bead alone will not fix a split overflow or a loose trap. We say which one it is.
Variants
The fittings this page covers
Plinth
The strip at the floor, where splash from a wet floor runs back under the bath.
Overflow
The hose and connection inside the void. A split here is identified. Replacing the bath overflow fitting is not sold as a bead of silicone.
End panel
The short return at the tap end or the foot end.
Scope
Included, and the jobs we will not call a reseal
Included in the visit
- Panel off where it can be removed without breaking clips
- A look at the void, the overflow hose, and obvious pipe drips
- Silicone on the panel and plinth edges that need it
- A stop if the fix is a fitting, not a bead
Outside this visit
- New bath panels, carpentry, or tiled baths that have no removable panel
- Replacing taps, wastes, or the overflow body
- Drying out a rotten floor and relaying it
- The wall rim, unless bath resealing is booked as well
How it is done
On the day
- 1
Open the void
The panel comes off if the clips allow. The wet area shows whether it is splash, overflow, or a pipe.
- 2
Deal with the edge
Failed panel silicone is cut out. A fitting leak is reported rather than buried.
- 3
Reseal the panel
Sanitary silicone goes on the edges that are meant to be sealed.
- 4
Cure
Do not run a deep bath or spray the plinth for 24 hours.
Symptoms
What you can see before you book
Wet under the panel
Splash over a missing plinth bead, or a hose that has split.
Ceiling mark after baths only
Overflow and waste are the first suspects, then the rim.
Mould on the panel joint
The bead at the floor has failed and holds dirty water.
Quote
What changes the price
The job is quoted. These are the factors, not a menu of fixed prices.
Panel type
A clip-on plastic panel is simpler than a screwed panel tight to the floor.
What is wet
A plinth bead is a smaller quote than a void that needs the overflow explained and the panel resealed.
Combined rim
Rim plus panel can be one visit if both are on the form.
After the visit
Prep, cure, and how long it lasts
Leave the panel clipped as we left it. Do not silicone the panel so thoroughly that it can never be removed. Keep water off the new edges for 24 hours.
Panel joints are splash seals. They last if the overflow and waste are sound. A new plinth bead on a split overflow hose fails the next time the bath is overfilled.
DIY
When a tube is the wrong tool
Sealing the panel shut is the usual DIY, and it hides the next leak. If you cannot see the void, do not assume the rim bead is the only joint.
Questions
Questions about bath panel sealing
Do you seal behind the bath panel?
We inspect the void and reseal the panel and plinth edges. We do not encase pipes in silicone. A failed overflow or trap is pointed out and is not billed as a successful reseal.
Is this the same as resealing the bath rim?
No. The rim is the wall joint. The panel is the front and the floor. Book both if both are failing.
Can you remove a bath panel without breaking it?
Clip-on panels usually come off. A panel that is screwed and painted in, or tiled, may not. Say how the panel is fixed when you send the quote.
What if the floor under the bath is rotten?
We will not lay silicone over a soft floor and call it repaired. The quote stops at the sealing work, and the floor is left as a finding.
Related work
Other joints
Areas we cover
Where this visit runs
Quote this bath panel sealing
Send the photo and the postcode on the form, or WhatsApp the same details. Water stays off the new bead for 24 hours.
Tell us which edge has failed
Name the room and the joint. If a ceiling below is stained, say when the water appears.